| Peer-Reviewed

A Reproduction of the Ancient Bandjeli’s Steel-Making Process

Received: 4 September 2014     Accepted: 23 September 2014     Published: 30 September 2014
Views:       Downloads:
Abstract

This paper presents an ancient traditional steel-making process of Bandjeli, in the Bassar Region in the Republic of Togo (West Africa). The iron specialists of Bandjeli have owned technical knowledge to cast direct reduced iron (DRI) likely direct reduced steel (DRS). This know-how was transferred to each generation over many centuries. The description of this steel-making process is focused on the steps that lead to the iron ingot: the construction of the furnace, the raw materials collection and their preparation, the furnace filling and the smelting operation. Microstructures of as-smelted and thermo-mechanical treated samples as well as hardness data are presented. Optical and SEM micrographs indicate a Widmannstätten structure type, comprising of a plates or needles of ferrite or alpha iron (Feα) in light contrast and grains of pearlite (dark contrast). Micro-hardness measurements indicate values ranging from 100 to 700 Hv, this field covers the micro-hardness values of the ferrite and pearlite. Microstructural and mechanical properties of the as-obtained product suggest direct steel processing from Bandjeli’s natural draught furnace. These results are necessary for further investigations on the as-smelted steel and on the contribution of this traditional smelting technology to the iron industry.

Published in International Journal of Materials Science and Applications (Volume 3, Issue 5)
DOI 10.11648/j.ijmsa.20140305.23
Page(s) 217-225
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Traditional Steel-Making Process, Natural Draught Furnace, Direct Reduced Steel, Microstructure, Hardness

References
[1] H. P. Hahn, Techniques de métallurgie au Nord Togo (Collection Patrimoines, 6). Lomé: Université de Bénin. (1997), (first published as: "Eisentechniken in Nord-Togo", Münster 1993)
[2] H. P. Hahn, Die materielle Kultur der Konkomba, Kabyè und Lamba in Nord-Togo. Ein regionaler Kulturvergleich. (Westafrikanische Studien, 14). (1996) Köln: Köppe J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–73
[3] N. Yamaguchi: A trial to reproduce an ancient iron-making process in Chiba prefecture; ISIJ International, Vol. 37 (1997), No. 2, pp. 97-101
[4] C.V. Bellamy: A West-African smelting house", JISI 56 (1904), p 99-126
[5] C. Goucher : "Technological change in Bassar iron production", Nyame Akuma 23 (1983), p.36
[6] C. Goucher, The iron industry of Bassar, Togo: An interdisciplinary investigation of African technological History, Dissertation for PhD degree, University of California, Los Angeles (1984)
[7] E. Coulibaly: Savoirs et savoir-faire des anciens métallurgistes d’Afrique Occidentale, KARTHALA, Paris, (2006)
[8] H. Bocum, Introduction générale, in Aux Origines de la Métallurgie du Fer en Afrique: Une ancienneté méconnue Afrique de l’Ouest et Afrique Centrale, H. Bocum (ed), Eds UNESCO, Paris, 2002, pp. 9-17
[9] Tylecote R. F., 1975, “Iron Smelting at Taruga, Nigeria”, Journal of The Historical Metallurgy society, IX (1975) 49-56
[10] K. Adekola: The African Diaspora Archaeology Network Newletter march (2011), 1
[11] P. de Barros, "Societal repercussions of the rise of large- scale traditional iron production: a West African example", The African Archaeological Review, 6 (1988), p.91-113
[12] B. Martinelli (1982): "Métallurgistes Bassar", Thèse de doctorat, Etudes et Documents de Sciences Humaines Nr.5, Lomé
[13] R. Haaland (1985): "African Ironworking - ancient and traditional", London
[14] M. S. Bisson, S. T. Childs, P. De Barros, A. F. C. Holl, Ancient African Metallurgy : the socio-cultural context, J. O Vogel (ed.), AltaMira Press, 2000
[15] P. de Barros: "Iron industry of the Bassar", Nyame Akuma 23 (1983), p.32-35
[16] P. de Barros, "Bassar: a quantified, chronologically controlled, regional approach to a traditional iron production centre in West Africa", Journal of the International African Institute 56 (1986), p. 148-173)
[17] R. Cornevin, Les Bassari du nord Togo, Éditions Berger-Levrault, Paris, 1962
[18] S. Dugast: "La pince et le soufflet", Journal des Africanistes, (1986) vol.56 (2), p.29-60
[19] L. Frobenius: Und Afrika sprach, 3 (1913): Unter den unsträflichen Äthiopen. Berlin: Vita
[20] W. Koert: Mitteilungen von Forschungsreisenden und Gelehrten aus den deutschen Schutzgebieten (MFGdS) 19 (1906), 111
[21] U. Kachinsky, Les gisements de fer au Togo, Revue Togo-Cameroun, Octobre 1933
[22] R. MAUNY, "Histoire de métaux en Afrique occidentale", Bulletin de l’IFAN, t. XIV, (1952), p. 578
[23] R. Fisch, Nord-Togo und seine westliche Nachbarschaft. Basel Basler Missionsbuchhandlung (1911). p. 162
[24] Fr. Hupfeld: Die Eisenindustrie in Togo", Deutsche Schutzgebiet 12 (1899), 175-191
[25] Z. J. von Graf: Mitteilungen von Forschungsreisenden und Gelehrten aus den Deutschen Schutzgebieten 9 (1896), 89.
[26] C. Robion- Brunner, B. Martinelli (ed.), Métallurgie du fer et Sociétés africaines, British Archaeological Reports (2012)
[27] SERNEELS V., ROBION-BRUNNER C., Perret S., La sidérurgie en pays dogon : problématiques, premiers résultats et perspectives, Etudes maliennes, no 65 (2007), p. 113-126
[28] N. van der Merwe, Production of high carbon steel in the African Iron Age: the Direct Steel Process, Proc. 8th PanAfrican Cong. of Prehistoric and Quaternary Studies, Leakey, R.E. & Ogot, B.E. (eds) (1980), 331-334
[29] H. P. Hahn, ZBl. Geol. Paläont. Teil I 3/4 (1995), 445
[30] L. M. Pole: Decline or Survival? Iron production in Westafricain, Journal of African History 23 (1982), 503-513
[31] R. Haaland, “Man’ role in the changing habitat of Mema during the old kingdom of Ghana”, Norwegian Archaeological Review (1980) 13: 31-46
[32] J. F. Jemkur, Les débuts de la métallurgie du fer en Afrique de l’Ouest, in Aux Origines de la Métallurgie du Fer en Afrique : Une ancienneté méconnue Afrique de l’Ouest et Afrique Centrale, H. Bocum (ed), Eds UNESCO, Paris, 2002, pp. 23-33. (Meroe)
[33] S. Passarge, In Meyer, H. (Hg.) Das deutsche Kolonialreich. Eine Länderkunde der deutschen Schutzgebiete. Leipzig Bibliographisches Institut (1910), pp. 49
[34] A. Schrader, A. Rose, Structure of Steels, de Ferri metallurgica T. II, Verlag Stahleusen M.B.H, Dusseldorf, (1966), pp. 306-307
[35] Pali KPELOU et al., Etude métallurgique du fer brut traditionnel de Bandjeli, Rev. Ivoir. Sci. Technol., 20 (2012) 24-34
Cite This Article
  • APA Style

    Pali Kpelou, Gnande Djeteli, Ayi Djifa Hounsi, Hans Peter Hahn, Tiburce Ahouangbe Aboki, et al. (2014). A Reproduction of the Ancient Bandjeli’s Steel-Making Process. International Journal of Materials Science and Applications, 3(5), 217-225. https://doi.org/10.11648/j.ijmsa.20140305.23

    Copy | Download

    ACS Style

    Pali Kpelou; Gnande Djeteli; Ayi Djifa Hounsi; Hans Peter Hahn; Tiburce Ahouangbe Aboki, et al. A Reproduction of the Ancient Bandjeli’s Steel-Making Process. Int. J. Mater. Sci. Appl. 2014, 3(5), 217-225. doi: 10.11648/j.ijmsa.20140305.23

    Copy | Download

    AMA Style

    Pali Kpelou, Gnande Djeteli, Ayi Djifa Hounsi, Hans Peter Hahn, Tiburce Ahouangbe Aboki, et al. A Reproduction of the Ancient Bandjeli’s Steel-Making Process. Int J Mater Sci Appl. 2014;3(5):217-225. doi: 10.11648/j.ijmsa.20140305.23

    Copy | Download

  • @article{10.11648/j.ijmsa.20140305.23,
      author = {Pali Kpelou and Gnande Djeteli and Ayi Djifa Hounsi and Hans Peter Hahn and Tiburce Ahouangbe Aboki and Kossi Napo},
      title = {A Reproduction of the Ancient Bandjeli’s Steel-Making Process},
      journal = {International Journal of Materials Science and Applications},
      volume = {3},
      number = {5},
      pages = {217-225},
      doi = {10.11648/j.ijmsa.20140305.23},
      url = {https://doi.org/10.11648/j.ijmsa.20140305.23},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140305.23},
      abstract = {This paper presents an ancient traditional steel-making process of Bandjeli, in the Bassar Region in the Republic of Togo (West Africa). The iron specialists of Bandjeli have owned technical knowledge to cast direct reduced iron (DRI) likely direct reduced steel (DRS). This know-how was transferred to each generation over many centuries. The description of this steel-making process is focused on the steps that lead to the iron ingot: the construction of the furnace, the raw materials collection and their preparation, the furnace filling and the smelting operation. Microstructures of as-smelted and thermo-mechanical treated samples as well as hardness data are presented. Optical and SEM micrographs indicate a Widmannstätten structure type, comprising of a plates or needles of ferrite or alpha iron (Feα) in light contrast and grains of pearlite (dark contrast). Micro-hardness measurements indicate values ranging from 100 to 700 Hv, this field covers the micro-hardness values of the ferrite and pearlite. Microstructural and mechanical properties of the as-obtained product suggest direct steel processing from Bandjeli’s natural draught furnace. These results are necessary for further investigations on the as-smelted steel and on the contribution of this traditional smelting technology to the iron industry.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - A Reproduction of the Ancient Bandjeli’s Steel-Making Process
    AU  - Pali Kpelou
    AU  - Gnande Djeteli
    AU  - Ayi Djifa Hounsi
    AU  - Hans Peter Hahn
    AU  - Tiburce Ahouangbe Aboki
    AU  - Kossi Napo
    Y1  - 2014/09/30
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmsa.20140305.23
    DO  - 10.11648/j.ijmsa.20140305.23
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 217
    EP  - 225
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20140305.23
    AB  - This paper presents an ancient traditional steel-making process of Bandjeli, in the Bassar Region in the Republic of Togo (West Africa). The iron specialists of Bandjeli have owned technical knowledge to cast direct reduced iron (DRI) likely direct reduced steel (DRS). This know-how was transferred to each generation over many centuries. The description of this steel-making process is focused on the steps that lead to the iron ingot: the construction of the furnace, the raw materials collection and their preparation, the furnace filling and the smelting operation. Microstructures of as-smelted and thermo-mechanical treated samples as well as hardness data are presented. Optical and SEM micrographs indicate a Widmannstätten structure type, comprising of a plates or needles of ferrite or alpha iron (Feα) in light contrast and grains of pearlite (dark contrast). Micro-hardness measurements indicate values ranging from 100 to 700 Hv, this field covers the micro-hardness values of the ferrite and pearlite. Microstructural and mechanical properties of the as-obtained product suggest direct steel processing from Bandjeli’s natural draught furnace. These results are necessary for further investigations on the as-smelted steel and on the contribution of this traditional smelting technology to the iron industry.
    VL  - 3
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Departement of Physics, Université de Lomé, Lomé, Togo

  • Departement of Physics, Université de Lomé, Lomé, Togo

  • Departement of Physics, Université de Lomé, Lomé, Togo

  • Institut für Ethnologie / Campus Westend, Universit?t Frankfurt, Grüneburgplatz 60323 Frankfurt am Main, Germany

  • GMS-LPCS UMR7045 / Chimie Paristech Paris Cedex 05, France

  • Departement of Physics, Université de Lomé, Lomé, Togo

  • Sections